Contact Us
Tel: +86-10-80533333
Fax: +86-10-80532699
Address: No.2 Zhangcai Road, Jufuyuan Industrial Park, Tongzhou district, Beijing.

Bead Blasted Matte Surface Stainless Steel Panel

Bead blast is process of applying fine glass beads at a high pressure onto stainless steel surface. The finish can be in different roughness and coarseness.

Products description
Bead blasted matte surface stainless steel panel, also called shot blast or sand blasted finish. This produced by the impact of a hard, inert medium onto the steel surface result in non-directional, uniform matte surface with low reflectivity. This processing should be done under high pressure. The texture of the blasted surfaces vary with the blast media, which include glass, ceramic or lead bead, silicon carbide, aluminium oxide, stainless steel shot or ground quartz. A range of gloss level and roughness (coarseness) level can be created according to application environment, depending upon the media used and the thickness of the material treated.
These finishes have both aesthetic appeal and can enhance the surface properties of stainless steels. They produce similar finishes to those obtained by acid etching. Blasted material can be chemically coloured, combined with rolled patterns, masked and polished or acid etched to create standard or bespoke designs.Unlike acid etching, no material is removed from the surface during the blasting process, but the character of the surfaces produced by these two processes are similar.

In order to keep the clean and consistency of SS surface, only clean round beads are used in blasted processing.
These finishing methods can be used in the specialist finishing shop or under site conditions is either before or after fabrication.


Normally standard size is 1000*2440mm, 1000*3050mm, 1219*2440mm, 1219*3050mm, 1500*2440mm, 1500*3000mm
Thickness: 0.3mm~3.0mm used commonly
Width: Cutting edge 1000mm/1220mm/1500mm, max 1524mm
Length: standard length 2438mm/3048mm, no limitation for length

The stainless steel panel surface with two layers PE film. Put into fumigated wooden cases. The gross weight for each package is less than 2tons. LCL or container, by sea or by air are all available ways.


Mirror stainless steel sheets mainly use for interior decoration, exterior decoration, elevator decoration, kitchen, some precision instrument.


Established stable cooperation with famous decoration companies, elevator companies, facade companies. Supply stainless steel flat panel, fabricated elevator parts, facade unit to customers.

TT, LC, DP, DA, Western Union, Money Gram, Trade Assurance

Hot Tags: bead blasted matte surface stainless steel panel, China, manufacturers, suppliers, wholesale, decorative