Contact Us
Tel: +86-10-80533333
Fax: +86-10-80532699
E-mail: phhjudy@u-view.com.cn
Address: No.2 Zhangcai Road, Jufuyuan Industrial Park, Tongzhou district, Beijing.
Home > News > Content
Classification And Performance Of Stainless Steel Scrolls
Sep 22, 2017

The stainless steel coil plate is divided into austenitic, ferrite, martensite, double phase (ferrite - austenitic) stainless steel cold rolled coil and stainless steel hot rolled coil.
1: stainless steel plate: has the branch of manufacture and hot rolled plate, the surface is bright surface, mist, inferior smooth surface. Also known as stainless steel plate, there are 2 b plate, BA plate. In addition, plating other light color according to customer requirements. The specifications of the plate are: 1 m * 1 m, 1 m * 2 m, 1.22 m * 2.44 m, 1.5 m * 1.5 m * 6 m, 3 m if the customer demand is big, we can cut according to the size of the customer. The other can do wire drawing board, checkered plate, galvanized plate.
2: stainless steel pipe, seamless pipe and tube (straight seam welded pipe, decoration pipe, welded pipe, welded pipe, the light tube). There are more than 200 stainless steel pipe specifications, size all have, tubular more expensive, especially capillary. Worst capillary material production by 304, otherwise easy to burst pipe. Can also be customized for clients of non-standard specifications of the pipes. Seamless tube is mainly used in industry, as the fog on the surface, no light. There is the surface of the tube light, there is a thin tube welding line, commonly known as welded pipe, it is mainly used for decorative materials. Otherwise industrial fluid tube, the pressure depending on the thickness. High temperature resistant pipe for 310 and 310 s. 1080 degrees can be normal use, heat-resistant up to 1150 degrees.
3: stainless steel bar, round bar, hexagonal bar, square steel, flat steel, six Angle steel, round steel, solid bar, hexagonal bar and square steel, flat steel) to be more expensive than round rods, (the company hexagonal rods specification for high-quality imported materials). The light the more expensive than the black surface. Large diameter of the rod for more black rods. 303 of them is a kind of special material, in the bar is easy car (cut) materials, mainly used in automatic lathe cutting. Another: 304 f. 303 cu. 316 f type also belong to a free cutting materials. 4: stainless steel belt, stainless steel roll), or call the take-up, coil, coil plate, plate roll. The term is more, the hardness of strip are also many, ranging from dozens to hundreds of customers need before buying determine what kind of hardness better. (8 k mirror luminosity). Coil width, are: 30 mm. 60 mm. 45 mm. 80 mm. 100 mm. 200 mm, etc. Can also be article points according to the requirement of the customers.
5: stainless steel wire, also called stainless steel wire, wire rod, pan yuan, but unlike stainless steel wire rope. Main wire spring wire and screws line two, as the name implies: the line is mainly used to do screw, screw and spring wire used for spring or other requirements of flexible hardware products. Other light line, for example, hydrogen annealing line, electrolytic line, axle pin line. The tensile strength of 1500-2000. The hardness of spring line has the following kinds: the soft hard | | a quarter and a half hard hard hard | | 3/4 full | hard. Wire rope specifications: 7 * 7 * 12 * 1, 6, 7, 7 * 19 or 17 * 39, than wire of the same material, bar, pipe, plate is expensive. Expensive for 7 * 7. 304 stainless steel is in the air or chemical corrosion resistant to corrosion in the medium of a kind of high alloy steel, stainless steel is a beautiful surface and corrosion resistant performance is good, need not after surface treatment, such as color of plating and the surface of the stainless steel inherent performance, used in a variety of steel a, often called stainless steel. Represents the performance of 13 chromium steel, 18-8 chromium nickel steel grade alloy steel.